Switching?We move your data and set you up, free·Usually in a day
industry • 12 min read

HVAC Industry Benchmarks 2026: Revenue, Margin, Close Rate.

By Jorge Del Castillo • Published Nov 17, 2026 • Reviewed by Gytis Kandrotas
An HVAC owner's desk at night with a laptop dashboard, a notebook of hand-drawn charts, a coffee mug and a truck key fob

Here's the number every HVAC owner wants and almost nobody publishes clean: $250K to $350K in annual revenue per service technician is average for a residential shop in 2026. $400K to $500K puts you in the top quartile. If your techs are under $200K, you don't have a tech problem — you have a dispatch problem or a pricebook problem. This is a benchmark reference, not an essay. Tables where tables belong. Every figure is labeled with its source — ACCA, Service Nation, BLS, IBISWorld, industry-aggregate, or Run a Call customer data — so you can argue with the number instead of guessing where it came from. If you want to skip to the end and just run your own numbers against the ranges, the close-rate ROI calculator is linked in the last section.

Revenue per employee, per technician, per truck

Residential HVAC revenue per technician averages $250K-$350K per year for service techs and $600K-$900K gross for lead installers, with revenue per total employee landing around $180K-$240K once you include dispatchers, CSRs, and admin. Revenue per truck tracks the tech on it — one tech, one truck, same number.

The trap is comparing across lanes. A maintenance tech running tune-ups all day will book $150K-$200K and that is correct for the lane. A service tech running diagnostics and selling repairs should hit $280K-$350K. A comfort advisor doing nothing but replacement estimates can push $1M+ in sold revenue but zero of it shows up on a wrench.

Here is the clean breakdown for a residential shop at 5-25 techs:

RoleAvg annual revenueTop-quartileSource
Maintenance tech$150K-$200K$220K+Industry-aggregate (Service Nation, ACCA peer groups)
Service tech$250K-$350K$400K-$500KIndustry-aggregate
Lead installer (crew of 2)$600K-$900K$1.1M+Industry-aggregate
Comfort advisor (sold rev)$800K-$1.5M$2M+Industry-aggregate
Revenue per total employee$180K-$240K$280K+Industry-aggregate

Total residential HVAC market is approximately 120,000 businesses in the US per IBISWorld, with roughly 35,000-45,000 running 3-15 technicians — the band where these benchmarks apply. The giants (10%+ of the market consolidated into PE roll-ups) run different economics and are not useful comparisons for an independent shop.

If your revenue-per-service-tech is under $200K, run the diagnosis in this order: (1) how many billable calls per tech per day — target 2.5-3.5 for service, (2) average ticket — target $450+ for residential service, (3) close rate on diagnosed opportunities — target 55%+. Fix the lowest of the three first. More techs will not help until the per-tech number is right.

Gross and net margin by shop size

Residential HVAC gross margin averages 45-55% blended across service and install, and net margin lands at 8-12% for a well-run shop at 5-25 techs. Service-only shops run higher gross margin (55-65%) because the labor-to-parts ratio is better. Install-heavy shops run lower gross margin (35-45%) because equipment eats the invoice.

Shop size changes the net margin curve in ways that surprise first-time scalers:

Shop sizeGross margin (blended)Net marginTypical bottleneck
1-4 techs50-60%15-20%Owner is still the dispatcher and the top closer
5-10 techs45-55%10-15%First layer of overhead (manager, CSR) hits before efficiency catches up
11-25 techs42-50%8-12%Dispatch quality is now the gating variable
25-50 techs40-48%6-10%Software costs, management layer, and inefficiency compound
50+ techs38-45%5-8%PE math — scale offsets margin compression

The dip from 15-20% net at owner-operator scale down to 8-12% at 11-25 techs is the hardest stretch to run a shop through. You added payroll, software, a dispatcher, maybe a GM — but you have not yet added enough technician capacity to spread that overhead. This is where owners second-guess the growth decision. It is also where tooling choice matters most, because a $500/tech software bill at 20 techs is $10K/month of margin walking out the door.

For context, ServiceTitan's S-1 filing shows the trades-software vendor itself ran negative GAAP net margins through its IPO. The irony of paying $245-$500 per tech per month to a company losing money while squeezing yours is not lost on anyone who has done the math. We ship Run a Call at one flat price per shop with every user included specifically to break that curve for shops in the 11-25 tech dip zone.

Average ticket: service, maintenance, replacement

Average residential HVAC tickets in 2026 land at $300-$650 for service, $120-$220 for maintenance, $5,000-$15,000 for repair-vs-replace repairs or partial installs, and $8,000-$22,000 for full change-outs. The spread inside each band is driven more by pricebook design than by geography.

Ticket typeLowAverageTop-quartileNotes
Diagnostic + minor repair$300$450$650+Capacitors, contactors, fuses, condensate pump
Major component repair$900$1,400$2,200+Blower motor, inducer, control board, TXV
Compressor replacement$2,500$3,800$5,500Includes recovery, braze, evacuation, warranty parts handling
Annual maintenance (per visit)$120$175$220+Membership visits usually 10-25% below one-off pricing
AC replacement (14 SEER2)$5,000$7,500$11,000R-454B / R-32 standard post-2025 phasedown
Full change-out (furnace + AC + coil)$12,000$16,500$22,000+High-efficiency, line-set, electrical, permitting
Heat pump change-out$9,000$14,000$20,000+Varies with incentives and ducting
Mini-split (3-head)$8,000$12,000$17,000Residential retrofit

Two numbers inside this table deserve attention. First, the $450 average diagnostic-plus-minor-repair ticket. Shops stuck at $280-$320 almost always have a pricebook built around hourly billing or a flat-rate book that is three years old and underpriced on R-454B refrigerant, capacitors, and contactors. If that's you, start with a flat-rate pricebook rebuild before you touch anything else — it's the single highest-ROI week an owner can spend.

Second, the maintenance ticket. $175 is the number but membership design makes or breaks it. A shop that sells memberships at $19-$25/month and runs two visits a year collects $228-$300 per customer per year of recurring revenue, plus whatever repairs and replacements that membership relationship generates over 7-10 years. That is the asset. The visit itself is almost incidental.

Close rate and callback rate benchmarks

Close rate for residential HVAC runs 50-60% average and 70-80% top-quartile, measured as opportunities-presented converted to sold work. Callback rate under 3% in 30 days is healthy; over 5% signals a process or training issue, not a technician issue.

MetricBelow averageAverageTop-quartileElite
Service close rate<40%50-60%70-80%85%+
Replacement close rate (comfort advisor)<25%35-45%50-60%65%+
Membership close rate (at service call)<15%25-35%45-55%60%+
30-day callback rate>5%3-5%1.5-2.5%<1%
First-time-fix rate<75%80-85%88-92%94%+

Close rate below 40% is almost never a tech problem. In order of probability it is: (1) techs don't believe the pricebook — usually because it was set without their input, (2) no option-based presentation (good/better/best) so the customer has nothing to choose between, only something to accept or reject, (3) no financing available at the kitchen table, (4) the diagnostic ends with a verbal number instead of a written option sheet. Fix those four before you blame hiring.

Callback rate is the inverse. When callbacks spike past 5%, the pattern is usually one of three things and it's trackable: the same tech showing up on the callback list (training gap — fix with a ride-along), the same part failing (truck-stock gap or vendor issue), or the same symptom type recurring (diagnostic shortcut — tech is treating a symptom not a cause). You cannot find any of these three unless you tag callbacks by tech, part, and failure mode. If your software doesn't make that trivial to filter, that's the tool's fault.

Run a Call customer data (anonymized, Q3 2026) across shops that have been on the system 6+ months shows close rate lifting an average of 7-12 percentage points in the first two quarters, almost entirely attributable to the pricebook rebuild we require during onboarding plus the option-based presentation default. That is not a software claim — it is a 'we made them redo the pricebook' claim. The software just made it faster.

Marketing spend and cost per booked call

Residential HVAC shops spend 5-10% of revenue on marketing in growth mode and 3-5% in mature-repeat mode. The number that actually matters is cost per booked call, not the percentage of revenue.

ChannelCost per leadCost per booked callNotes
Google Local Service Ads (LSA)$20-$80$35-$120Pay-per-lead, Google-verified badge
Google Search Ads$50-$200$80-$280Depends on competition, ad quality, landing page
SEO / organic~$0 variable$15-$40 (amortized)6-12 month ramp, highest LTV
Referral program<$30<$40Highest close rate (65-75%)
Direct mail (suburban)$15-$60$40-$120Seasonal, works in dense residential
Facebook / Meta$25-$90$60-$180Better for memberships than emergencies
Nextdoor$20-$70$45-$130Strong in suburban rings
Yard signs + door hangers$5-$15$25-$60Install neighborhoods only
Billboards / radiovaries$150-$400+Hard to attribute, brand play

Two rules make this table actionable. First, if any paid channel runs over $200 per booked call for a full quarter, pause it and audit the funnel before you add budget. Usually the problem is on your end — slow phone answer, no after-hours coverage, or a website that doesn't match the ad. Our AI receptionist exists specifically to kill the slow-answer problem; it answers 24/7 and books into the dispatch board, with a call summary emailed to the inbox.

Second, cost per booked call is not the same as cost per sold job. A $40 booked call that closes at 60% with a $450 average ticket produces $270 of revenue — a 15% marketing-cost ratio on that job, in line. A $120 booked call that closes at 40% at the same ticket is $300 revenue on $120 marketing — 40% ratio, which eats the margin alive. Track to sold revenue, not to booked calls.

For the full playbook on which channels to run and in what order, the HVAC marketing playbook is the companion piece to this benchmark page.

Technician pay, memberships per 100 customers, and how you compare

HVAC service technician pay in 2026 averages $28-$42/hour base per BLS Occupational Outlook, with top earners (lead service techs, senior installers, comfort advisors) earning $85K-$140K/year total compensation including spiffs, commission, and overtime. Memberships per 100 unique customers averages 15-25 active and 30-40 is top-quartile.

RoleBase payTotal comp (incl. spiffs/commission)Notes
Apprentice / helper$18-$24/hr$42K-$55KFirst 1-2 years
Maintenance tech$22-$30/hr$55K-$70KNATE basic preferred
Service tech$28-$42/hr$70K-$105KNATE certified, spiff on repairs
Senior service / lead$35-$50/hr$95K-$140KMentors apprentices
Install lead$32-$46/hr$85K-$130KCrew productivity bonus
Comfort advisorbase + comm$100K-$180K+Pure commission at top shops
Dispatcher / CSR$20-$30/hr$45K-$65KUnderpaid industry-wide

Membership density is the metric that quietly drives valuation. A shop with 1,500 active maintenance members at $20/month is $360K/year of recurring revenue plus roughly 3-5x that in attributable repair and replacement work from the member base. The same-revenue shop with 300 members trades at a lower multiple because the asset isn't there. Target 15-25 per 100 unique customers if you're building toward sale.

How you compare — the one-page scorecard

Print this. Fill in your numbers next to the benchmarks. Everything that scores below average goes on the Q1 fix list.

MetricYour numberAverageTop-quartile
Revenue per service tech___$250K-$350K$400K-$500K
Blended gross margin___ %45-55%55-62%
Net margin___ %8-12%15%+
Avg service ticket$ ___$450$650+
Service close rate___ %50-60%70-80%
30-day callback rate___ %3-5%<2.5%
Marketing % of revenue___ %5-10%—
Memberships per 100 customers___15-2530-40
Revenue per total employee$ ___$180K-$240K$280K+

If more than three rows are below average, don't try to fix them in parallel. Pick the one with the biggest dollar impact — usually ticket size or close rate — and run a 90-day sprint on that single number. The others move as a side effect more often than not.

If you want to see how the dispatch board, pricebook, and revenue-per-tech reports surface these numbers automatically — without an exported spreadsheet and a Sunday — walk through Run a Call. Free trial, no card, no demo call. The revenue-per-tech report and memberships module are the two most-used reports by shops using the system to run quarterly reviews against this benchmark page.

Frequently asked

What is a good revenue per technician for a residential HVAC shop?

For residential service shops, $250K-$350K per service tech per year is average, and $400K-$500K is top-quartile. Install crews run higher on gross revenue ($600K-$900K per lead installer) but carry more COGS, so revenue-per-tech comparisons only make sense inside the same lane — service vs install vs maintenance. If your service techs are under $200K, the problem is almost always dispatch (too few calls on the board) or ticket size (no proper flat-rate pricebook), not the techs themselves.

What close rate should my HVAC techs hit?

50-60% close rate (opportunities converted to sold work) is the industry average for residential service. 70-80% is top-quartile and usually indicates good pricebook design, option-based presenting (good/better/best), and consistent ride-alongs. Below 40% almost always points to either pricing techs don't believe in or no structured presentation process — not a 'bad tech' problem.

What's a normal callback rate in HVAC?

Under 3% in 30 days is healthy. 3-5% is a warning zone. Over 5% is a process or training problem — not a tech problem — and it's almost always traceable to one of three things: diagnostic shortcuts, missing parts on the truck forcing rushed fixes, or a specific tech who needs a ride-along. Track it by tech and by failure mode (same part, same symptom) and the pattern shows up fast.

How much should an HVAC shop spend on marketing?

5-10% of revenue is the normal range for residential shops in growth mode. Mature shops with strong repeat and referral can run 3-5%. The number that matters more than the percentage is cost per booked call: LSA $20-$80, Google Ads $50-$200, referral under $30, direct mail $15-$60 in good suburban territory. If any channel is over $200 per booked call for more than a quarter, pause it and audit — don't just add budget.

How many memberships should an HVAC shop have per 100 customers?

15-25 active maintenance memberships per 100 unique customers is average for a service-focused shop. 30-40 is top-quartile and usually requires a dedicated membership offer at every service call plus a renewal process that doesn't rely on a tech remembering. Memberships are the single highest-leverage metric for shop valuation — a shop with 1,500 active members trades at a different multiple than one with 300, even at the same revenue.

Ready to switch HVAC software?

Walk through the dispatch board, pricebook, and mobile app in 30 minutes. No commitment.

Book a walkthrough
Jorge Del Castillo
Jorge Del Castillo

Co-founder of run a call. Owns engineering. €6M of operational systems at Airbus, then an AI workflow-automation firm acquired by Transputec, now Head of Enterprise Automation there.

Read full bio →
Keep reading